I've been experimenting with methods for visualising harmony, intonation (tuning), and overtones in music. Ordinary spectrograms aren't very well suited for that as the harmonic relations are not intuitively visible. Let's see what could be done about this. I'll try to sprinkle the text with Wikipedia links in order to immerse (nerd snipe?) the reader in the subject.
Equal temperament cents against time
We can examine how tuning evolves during a recording by choosing a reference pitch and plotting all frequencies relative to it modulo 100 cents. This is similar to what an electronic tuner does, but instead of just showing the fundamental frequency, we'll plot the whole spectrum. Information about the absolute frequencies is lost. This "zoomed-in" plot visualises how the distribution of frequencies fits the 12-tone equal temperament system (12-TET) common in Western music.
Here's the first 20 seconds of Debussy's Clair De Lune as found on YouTube, played with a well-tuned (video) and an out-of-tune piano (video). The second piano sounds out of tune because there are relative differences in tuning between the strings. The first piano looks to be a few cents sharp as a whole, but consistently so, so it's not perceptible.
The vertical axis is the same that electronic tuners use. All the notes of a chord will appear in the middle, as long as they are well tuned against the reference pitch of, say, A = 440 Hz. The top edge of the graph is half a semitone sharp (quarter tone = 50c), and the bottom is half a semitone flat.
Overtones barely appear in the picture because the first three conveniently hit other notes in tune. But from f5 onwards the harmonic series starts deviating from 12-TET and the harmonics start to look out-of-tune (f5 = −14c, f7 = −31c, ...). These can be cut out by filtering, or hoping that they're lower in volume and setting the color range accordingly.
Six months later...
You know how you sometimes accidentally delete a project and have to rewrite it from scratch much later, and it's never exactly the same? That's what happened at this point. It's a little scuffed, but here's some piano music that utilises quarter tones (by Wyschnegradsky). I used the same scale on purpose, so the quarter tones wrap around from the top and bottom.
More examples of these "intonation plots" in a tweet.
This suits well for piano music. However, not even all western classical music is tuned to equal temperament; for instance, solo strings may be played with Pythagorean intonation[1], whereas vocal ensembles[2] and string quartets may tune some intervals closer to just intonation. Unlike the piano, these wouldn't look too good in the equal-note plot.
Octave spiral
If we instead plot the spectrum modulo 1200 cents (1 octave) we get an interesting interval view. We could even ditch the time scale and wind the spectrogram into a spiral to make it prettier and preserve the overtones and absolute frequency information. Now each note is represented by an angle in this spiral; in 12-TET, they're separated by 30 degrees. At any point in the spiral, going 1 turn outwards doubles the frequency.
Here's a C major chord on a piano. Note how the harmonic content adds several high-frequency notes on top of the C, E, and G of the triad chord, and how multiple notes can contribute to the same overtone:
I had actually hoped I would get an Ultimate Chord Viewer where any note, regardless of frequency, would have all its harmonics neatly stacked on top of it. But it's not what has happened here: the harmonic series is not a stack of octaves (2^n), but instead of integer multiples (n). Some harmonics appear at seemingly unrelated angles. But it's still a pretty interesting visualisation, and perhaps makes more sense musically.
This plot is also better at illustrating different tuning systems. Let's look at a major third interval F-A in equal temperament and just intonation, with a few more harmonics.
The intuition from this plot is that equal temperament aims for equal distances (angles) between notes and just intonation tries to make more of the harmonics match instead.
Even though the Ultimate Chord Viewer was not achieved I now have ideas for Christmas lights...
Live visualization
Here's what a cappella music with some reverb looks like on the spiral spectrogram.
A shader toy
This little real-time GLSL demo on shadertoy draws a spiral FFT from microphone audio. But don't get your hopes up: The spectrograms in this blog post were made with a 65536-point FFT. Shadertoy's 512px microphone texture offers a lot less in terms of frequency range and bins. This greatly blurs the frequency resolution, especially towars the low end. Could it be improved with the right colormap? Or a custom FFT with the waveform texture as its input?
I had a dream one night where a blackbird was talking in human language. When I woke up there was actually a blackbird singing outside the window. Its inflections were curiously speech-like. The dreaming mind only needed to imagine a bunch of additional harmonics to form phonemes and words. One was left wondering if speech could be transformed into a blackbird song by isolating one of the harmonics...
One way to do this would be to:
Find the instantaneous fundamental frequency and amplitude of the speech. For example, filter the harmonics out and use an FM demodulator to find the frequency. Then find the signal envelope amplitude by AM demodulation.
Generate a new wave with similar amplitude variations but greatly multiplied in frequency.
A proof-of-concept script using the Perl-SoX-csdr command-line toolchain is available (source code here). The result sounds surprisingly blackbird-like. Even the little trills are there, probably as a result of FM noise or maybe vocal fry at the end of sentences. I got the best results by speaking slowly and using exaggerated inflection.
Someone hinted that the type of intonation used in certain automatic announcements is perfect for this kind of conversion. And it seems to be true! Here, a noise gate and reverb has been added to the result to improve it a little:
And finally, a piece of sound art where this synthetic blackbird song is mixed with a subtle chord and a forest ambience:
Think of the possibilities: A simultaneous interpreter for talking to birds. A tool for dubbing talking birds in animation or live theatre. Entertainment for cats.
What other birds could be done with a voice changer like this? What about croaky birds like a duck or a crow?
Back in April I bought a vinyl record that had a weird wavy pattern near the outer edge. I though I may have broken it somehow but couldn't even test this because I don't own a record player. *) But when I took a closer look at the pattern it seemed to somehow follow changes in the music. That doesn't look like damage at all.
When I played the CD version it became clear: this was an artifact of the tempo of the electronic track (100 bpm) being a multiple of the rotational speed (33 1/3 rpm), and these were probably drum hits! My tweet sparked some interesting discussion and I've been pondering this ever since. Could we plot any song as a loop or grid based on its own tempo and see interesting patterns?
(*) I know, it's a little odd. But I have a few unplayed vinyl records waiting for the day that I finally have the proper equipment. By the way, the song was Black Pink by RinneRadio from their wonderful album staRRk.
I wrote a little script to do just this: to plot the amplitude of the FLAC into a grid with an adjustable width. The result looks very similar to the pattern on the vinyl surface! Note that this image is a "straightened out" version of the disc surface and it's showing three of those wavy patterns. The top edge corresponds to the outer edge of the vinyl.
Later I wrote a little more ambitious plotter that shall be explained soon.
Computer-conducted music gives best patterns
After plotting several different songs against their own tempo like this it seemed that in addition to electronic music a lot of pop and rock has this type of a pattern, too. The most striking and clear patterns can be seen in music that makes use of drum samples in a quantized time base (aka. a drum machine): the same kick drum sample, for example, repeats four times in each bar, perfectly timed by a computer so that they align in phase.
Somewhat similar patterns can be seen in live music that is played to a "click track": each band member hears a common computer-generated time signal in their earplug so that they won't sway from an average tempo. But of course the live beats won't be perfectly phase-aligned in this case, because the musicians are humans and there's also physics involved.
3D rendered video experiment
To demonstrate how the patterns on vinyl records are born I made a video showing a fantasy record player that can play an "e-ink powered optical record" and morph it into any RPM. I say fantasy because it's just that: imagination, science fiction, rendered 3D art - it would be quite unfeasible in real life. You can't actually make e-ink displays that fast and accurate. But of course it would be possible to have a live display of a digitally sampled audio file as a spiral and use some kind of physical controllers to change the RPM value in real time, and just play the sound from a digital file.
Making the video was really fun and I think the end result is equal parts weird and illustrating.
Programming the disk surface and audio
The disc surface is based on a video texture: a different image was rendered for each changed frame using a purpose-written C++ program. The program uses an oversampled (8x) version of the original music that it then resamples at a variable rate based on the recorded RPM value (let's call it a morphing value). Oversampling and low-pass filtering beforehand makes variable-rate resampling simple: just take a sample at the appropriate time instant and don't worry about interpolation. It won't sound perfect but actually the artifact adds an interesting distortion, perhaps simulating pixel boundaries in the 'e-ink display'.
The amplitude sample at each time instant was projected into polar coordinates and plotted as an image. The image is fairly large - at least 2048 by 2048 pixels. I use this as a sort of image-space oversampling to get the polar projection to look a little better. I even tried 8192 x 8192 video but it was getting too heavy on my computer. But a new image must only be generated when the morphing value changes; the other frames can be copied.
The sound track was made by continuously sampling the position of the "play head" 44100 times per second, whether the disk was moving or not. Which sample ends up in the audio depends on the current rotational angle and the morphing value of the disk surface. When either of those values change it moves the audio past the play head. A DC cancel filter was then applied because the play head would often stop on a non-zero sample, and it didn't look nice in the waveform. There's also a quiet hum in the background.
I made an event-based system where I could input events simulating the button presses and other controls. The system responds to speed change events with a smoothstep function so that the disc seems to have realistic inertia. Also, the slow startup and slowdown sounds kind of cool this way. Here's an extra-slow version of the effect -- you can hear the slight aliasing artifacts in the very beginning and end:
3D modeling, texturing, shading
The models were all made in Blender, a tool that I've slowly learned to use during the pandemic situation. Its modeling tools are pretty fun to use and once you learn it you can build pretty 3D models to look at that won't take up any room in your apartment.
I love the retro aesthetic of old reel-to-reel players and other studio equipment. So I looked for inspiration by searching "reel-to-reel" on Google Images. Try it out, it's worth it! Originally I wanted for the disc to be transparent with some type of movable particles inside, and the laser to be shone through it, but this was computationally very expensive to render. So I made it and 'e-ink' display instead. (I regret this choice a little bit since some people, at first glance, apparently thought the video depicted actual existing technology. But I tried to make it clear it's a photorealistic render :)
I made use of the boolean workflow and bevel modifiers to cut holes and other small details in the hard surfaces. The cables are Bezier curves with the round bevel setting enabled.
The little red LCD is also a video texture on an emission shader – each frame was an SVG that was changed a little in time to add flicker and then exported using Inkscape from a batch script.
The wood textures, fingerprints, and the room environment photo are from HDRi Haven, Texture Haven and CC0 Textures. I'm especially proud of all the details on the disc surface -- here's the shader setup I built for the surface:
The video was rendered in Blender Eevee and it took maybe 10 hours at 720p60. It's sad that it's not in 1080p but I was impatient. I spent quite some time to make the little red LCD look realistic but it was completely spoiled by compression!
Here's a bigger still rendered in Cycles:
Mapping rotation to the disc
Rotation angles from the C++ program were sampled 60 times per second and output as CSV. These were then imported to Blender as keyframes for the rotating disc, using the Python API:
Here you only need to print a new keyframe when the speed of rotation changes, or is about to change; Blender will interpolate the rest.
A Driver was set up to make the Y rotation slightly follow the Z rotation with a very small factor to make the disc 'wobble' a bit.
What's next?
It's endless fun to build and program functional fantasy electronics and I may need to do more of that. I'm currently also obsessed with 3D modeled dollhouses and who knows how those things will combine?
By the way, there is an actual device somewhat resembling this 3D model. It's called the Panoptigon, it's sort of an optical mellotrone (video).
I play 1980s games, mostly Super Mario Bros., on the Nintendo NES console. It would be great to be able to capture live video from the console for recording speedrun attempts. Now, how to make the 1985 NES and the 2013 MacBook play together, preferably using hardware that I already have? This project diary documents my search for the answer.
Here's a spoiler – it did work:
Things that I tried first
A capture device
Video capture devices, or capture cards, are devices specially made for this purpose. There was only one cheap (~30€) capture device for composite video available locally, and I bought it, hopingly. But it wasn't readily recognized as a video device on the Mac, and there seemed to be no Mac drivers available. Having already almost capped my budget for this project I then ordered a 5€ EasyCap device from eBay, as there was some evidence of Mac drivers online. The EasyCap was still making its way to Finland as of this writing, so I continued to pursure other routes.
PS: When the device finally arrived, it sadly seemed that the EasyCapViewer-Fushicai software only supports opening this device in NTSC mode. There's PAL support in later commits in the GitHub repo, but the project is old and can't be compiled anymore as Apple has deprecated QuickTime.
Even when they do work, a downside to many cheap capture devices is that they can only capture at half the true framerate (that is, at 25 or 30 fps).
CRT TV + DSLR camera
The cathode-ray tube television that I use for gaming could be filmed with a digital camera. This posed interesting problems: The camera must be timed appropriately so that a full scan is captured in every frame, to prevent temporal aliasing (stripes). This is why I used a DSLR camera with a full manual mode (Canon EOS 550D in this case).
For the 50 Hz PAL television screen I used a camera frame rate of 25 fps and an exposure time of 1/50 seconds (set by camera limitations). The camera will miss every other frame of the original 50 fps video, but on the other hand, will get an evenly lit screen every time.
A Moiré pattern will also appear if the camera is focused on the CRT shadow mask. This is due to intererence between two regular 2D arrays, the shadow mask in the TV and the CCD array in the camera. I got rid of this by setting the camera on manual focus and defocusing the lense just a bit.
This produced surprisingly good quality video, save for the slight jerkiness caused by the low frame rate (video). This setup was good for one-off videos; However, I could not use this setup for live streaming, because the camera could only record on the SD card and not connect to the computer directly.
LCD TV + webcam
An old LCD TV that I have has significantly less flicker than the CRT, and I could have live video via the webcam. But the Microsoft LifeCam HD-3000 that I have had only a binary option for manual exposure (pretty much "none" and "lots"). Using the higher setting the video was quite washed out, with lots of motion blur. The lower setting was so fast that it looked like the LCD had visible vertical scanning. Brightness was also heavily dependent on viewing angle, which caused gradients over the image. I had to film at a slightly elevated angle so that the upper part of the image wouldn't go too dark, and this made the video look like a bootleg movie copy.
Composite video
Now to capturing the actual video signal. The NES has two analog video outputs: one is composite video and the other an RF modulator, which has the same composite video signal modulated onto an AM carrier in the VHF television band plus a separate FM audio carrier. This is meant for televisions with no composite video input: the TV sees the NES as an analog TV station and can tune to it.
In composite video, information about brightness, colour, and synchronisation is encoded in the signal's instantaneous voltage. The bandwidth of this signal is at least 5 MHz, or 10 MHz when RF modulated, which would require a 10 MHz IQ sampling rate.
I happen to have an Airspy R2 SDR receiver that can listen to VHF and take 10 million samples per second - could it be possible? I made a cable that can take the signal from the NES RCA connector to the Airspy SMA connector. And sure enough, when the NES RF channel selector is at position "3", a strong signal indeed appears on VHF television channel 3, at around 55 MHz.
Software choices
There's already an analog TV demodulator for SDRs - it's a plugin for SDR# called TVSharp. But SDR# is a Windows program and TVSharp doesn't seem to support colour. And it seemed like an interesting challenge to write a real-time PAL demodulator myself anyway.
I had been playing with analog video demodulation recently because of my HDMI Tempest project (video). So I had already written a C++ program that interprets a 10 Msps digitised signal as greyscale values and sync pulses and show it live on the screen. Perhaps this could be used as a basis to build on. (It was not published, but apparently there is a similar project written in Java, called TempestSDR)
Data transfer from the SDR is done using airspy_rx from airspy-tools. This is piped to my program that reads the data into a buffer, 256 ksamples at a time.
Automatic gain control is an important part of demodulating an AM signal. I used liquid-dsp's AGC by feeding it the maximum amplitude over every scanline period; this roughly corresponds to sync level. This is suboptimal, but it works in our high-SNR case. AM demodulation was done using std::abs() on the complex-valued samples. The resulting real value had to be flipped from 1, because TV is transmitted "inverse AM" to save on the power bill. I then scaled the signal so that black level was close to 0, white level close to 1, and sync level below 0.
I use SDL2 to display the video and OpenCV for pixel addressing, scaling, cropping, and YUV-RGB conversions. OpenCV is an overkill dependency inherited from the Tempest project and SDL2 could probably do all of those things by itself. This remains TODO.
Removing the audio
The captured AM carrier seems otherwise clean, but there's an interfering peak on the lower sideband side at about –4.5 MHz. I originally saw it in the demodulated signal and thought it would be related to colour, as it's very close to the PAL chroma subcarrier frequency of 4.43361875 MHz. But when it started changing frequency in triangle-wave shapes, I realized it's the audio FM carrier. Indeed, when it is FM demodulated, beautiful NES music can be heard.
The audio carrier is actually outside this 10 MHz sampled bandwidth. But it's so close to the edge (and so powerful) that the Airspy's anti-alias filter cannot sufficiently attenuate it, and it becomes folded, i.e. aliased, onto our signal. This caused visible banding in the greyscale image, and some synchronization problems.
I removed the audio using a narrow FIR notch filter from the liquid-dsp library. Now, the picture quality is very much acceptable. Minor artifacts are visible in narrow vertical lines because of a pixel rounding choice I made, but they can be ignored.
Decoding colour
PAL colour is a bit complicated. It was designed in the 1960s to be backwards compatible with black-and-white TV receivers. It uses the YUV colourspace, the Y or "luminance" channel being a black-and-white sum signal that already looks good by itself. Even if the whole composite signal is interpreted as Y, the artifacts caused by colour information are bearable. Y also has a lot more bandwidth, and hence resolution, than the U and V (chrominance) channels.
U and V are encoded in a chrominance subcarrier in a way that I still haven't quite grasped. The carrier is suppressed, but a burst of carrier is transmitted just before every scanline for reference (so-called colour burst).
Turns out that much of the chroma information can be recovered by band-pass filtering the chrominance signal, mixing it down to baseband using a PLL locked to the colour burst, rotating it by a magic number (chroma *= std::polar(1.f, deg2rad(170.f))), and plotting the real and imaginary parts of this complex number as the U and V colour channels. This is similar to how NTSC colour is demodulated.
In PAL, every other scanline has its chrominance phase shifted (hence the name, Phase Alternating [by] Line). I couldn't get consistent results demodulating this, so I skipped the chrominance part of every other line and copied it from the line above. This doesn't even look too bad for my purposes. However, there seems to be a pre-echo in UV that's especially visible on a blue background (most of SMB1 sadly), and a faint stripe pattern on the Y channel, most probably crosstalk from the chroma subcarrier that I left intact for now.
I used liquid_firfilt to band-pass the chroma signal, and liquid_nco to lock onto the colour burst and shift the chroma to baseband.
Let's play Tetris!
Latency
It's not my goal to use this system as a gaming display; I'm still planning to use the CRT. However, total buffer delays are quite small due to the 10 Msps sampling rate, so the latency from controller to screen is pretty good. The laptop can also easily decode and render at 50 fps, which is the native frame rate of the PAL NES. Tetris is playable up to level 12!
Using a slow-mo phone camera, I measured the time it takes for a button press to make Mario jump. The latency is similar to that of a NES emulator:
Method
Frames @240fps
Latency
RetroArch emulator
28
117 ms
PAL NES + Airspy SDR
26
108 ms
PAL NES + LCD TV
20
83 ms
Maybe you now notice that the CRT is not listed here. That's because before I could make these measurements a funny sound was heard from inside the TV and a picture has never appeared since.
Performance considerations
A 2013 MacBook Pro is perhaps not the best choice for dealing with live video to begin with. But I want to be able to run the PAL decoder and a screencap / compositing / streaming client on the same laptop, so performance is even more crucial.
When colour is enabled, CPU usage on this quad-core laptop is 110% for palview and 32% for airspy_rx. The CPU temperature is somewhere around 85 °C. Black-and-white decoding lowers palview usage to 84% and CPU temps to 80 °C. I don't think there's enough cycles left for a streaming client just yet. Some CPU headroom would be nice as well; a resync after dropped samples looks quite nasty, and I wouldn't want that to happen very often.
Profiling reveals that the most CPU-intensive tasks are those related to FIR filtering. FIR filters are based on convolution, which is of high computational complexity, unless done in hardware. FFT convolution can also be faster, but only when the kernel is relatively long.
I've thought of having another computer do the Airspy transfer, audio notch filtering, and AM demodulation, and then transmit this preprocessed signal to the laptop via Ethernet. But my other computers (Raspberry Pi 3B+ and a Core 2 Duo T7500 laptop) are not nearly as powerful as the MacBook.
Instead of a FIR bandpass filter, a so-called chrominance comb filter is often used to separate chrominance from luminance. This could be realized very efficiently as a linear-complexity delay line. This is a promising possibility, but so far my experiments have had mixed results.
There's no source code release for now (Why? FAQ), but if you want some real-time coverage of this project, I did a multi-threaded tweetstorm:
one,
two,
three.